GravityWorks™ 6.0L Water Filter System
- No pumping: Just fill the dirty reservoir, hang it, and let gravity do the hard work—yep, filtering water can be as easy as fill, hang, relax.
- Fast: Filters up to 1.75 liters per minute; microfilter lifetime up to 1,500 liters of water.
- Effective: Every microfilter is individually tested to ensure it meets all EPA & NSF guidelines for the removal of 99.9999% of bacteria and 99.9% of protozoa*.
- Light & Compact: System weighs 11.5 oz. (326 g) and stows smaller than most 1L bottles.
- Group-ready: 8 or 12 liter (4.0L/6.0L filtered + 4.0L/6.0L unfiltered) total capacity easily supplies water for groups.
- Field-cleanable: Microfilter can be easily backflushed in 4 seconds to maintain filter performance.
- Hollow Fiber Advantage: Hundreds of tiny, hollow fibers enable the microfilter to filter water faster than traditional filter media.
- Easy collecting & dispensing: Collecting water is easy—simply open the top, scoop water, and close; control delivery of filtered water with hose shutoff clamp.
Comes with: Clean reservoir (4.0L or 6.0L), Dirty reservoir (4.0L or 6.0L), Hollow Fiber microfilter, hoses, shutoff clamp, and storage sack.
*This includes Giardia, Cryptosporidium, E. coli, Salmonella and Cholera.
|4.0 liter||6.0 liter|
|Weight (Standard)||11.5 oz||12.3 oz|
|Weight (Metric)||0.33 kg||0.35 kg|
|Width (Standard)||3.25 in||10 in|
|Width (Metric)||8 cm||26 cm|
|Length (Standard)||9.5 in||19.5 in|
|Length (Metric)||24 cm||49 cm|
|Effective against bacteria||Yes||Yes|
|Effective against chemicals/toxins||No||No|
|Effective against particulate||Yes||Yes|
|Effective against protozoa||Yes||Yes|
|Effective against viruses||No||No|
|Filter media||Hollow Fiber||Hollow Fiber|
|Filter pore size (microns)||0.2||0.2|
|Flow (L/min)||1.75 liters per min||1.75 liters per min|
|Cartridge life||1500 liters||1500 liters|
|Water Bottle Adapter||No||No|
|Cartridge replacement indicator||No||No|
|Country of Origin||Made in U.S.A. of U.S. and Imported Materials||Assembled in U.S.A. of U.S. and Imported Materials|
Tea-colored water typically has a high concentration of decaying vegetation adjacent to, or in, a water source, resulting in a variety of organic acids. These acids, and the accompanying water conditions, are very hard on ALL types of water filters. Get your water elsewhere if you can.
However, if no alternatives exist, we recommend backflushing/cleaning your filter more frequently, even after each use. This will help minimize the clogging of the filter.
No. Hollow Fiber filter media does not remove tastes from water.
However, the use or addition of an additional filter with carbon activated technology will absorb most of the unwanted tastes you may find in filtered backcountry water. For our GravityWorks systems, our Carbon Element accessory is available for those that prefer cleaner-tasting filtered water.
To disinfect your Platypus filtration system, fill it with a solution of unscented household bleach and water, using a concentration of 2-5 drops per liter of water. Close and swirl for 10 seconds. Leave filled overnight.
Filter solution through any filters and/or hoses, then rinse system (including filters and hoses) three times with hot water. Let air dry.
Note: for an eco-friendlier option, use a chlorine-free, hydrogen peroxide-based bleach alternative.
Cleaning regularly maintains optimal performance of the filter cartridge. This is especially true when filtering murky or very silty water. Cleaning dislodges particulate that collects on the outside of the Hollow Fiber filter media. Infrequent cleaning makes it more difficult to restore the filter’s flow rate.
Based on results from our in-house water lab, we recommend cleaning anywhere from every 6 liters to as often as after each use, but this can vary depending on water quality. Our lab has found that with frequent cleaning of your filter, you can expect more consistent flow performance and a longer life from your filter.
A used GravityWorks™ or Meta™ Bottle filter will have wet Hollow Fiber filter media, which can freeze and break the fibers of the filter media (permanently damaging the filter). Therefore, it is important to prevent Hollow Fiber filters from freezing.
If you are traveling in areas where you are expecting freezing or near-freezing temperatures, we recommend carrying or stowing the filter cartridge near your body (e.g., in a chest pocket) and bringing the filter cartridge with you into your tent, or even your sleeping bag. (Be sure to put the filter cartridge in a watertight bag to prevent leaks.)
If you think your filter may have been damaged by freezing, perform a filter integrity test before the next use (see instructions for your filter product). We recommend carrying a replacement filter as a backup in case of a failed integrity test.
Hollow Fiber filters can be sensitive to hard drops. Any drops from heights over 5 feet (1.5 m) and direct drops onto cement or rocks should be avoided with GravityWorks™ and Meta™ Bottle filters.
If you think your filter may have been damaged from a drop, perform a filter integrity test before the next use (see instructions for your filter product). We recommend carrying a replacement filter as a backup in case of a failed integrity test.
Note: do not remove the protective bumpers on the GravityWorks filters.
Yes there is! The Big Zip™ EVO Filter Connector Kit is a nifty accessory that allows you to filter directly from your GravityWorks™ into your Big Zip EVO without ever having to remove your reservoir from your pack.
To do so, you first need to remove your drink tube from your reservoir via the quick-disconnect. Then, plug the connection point on the connector kit's hose directly into quick-disconnect point (you will hear a click). Next, attach the connector kit's hose to the base of your GravityWorks filter cartridge. Let gravity do the rest, as you're now on your way to clean, taste-free hydration.
Many replacement parts can be purchased directly from us online on our Accessories page or from one our retailers. If you cannot find what you’re looking for, our friendly customer service team can assist you:
For customers outside North America, please consult our International Distributor listings.
Free Shipping on Orders over $50
We offer complimentary FedEx Ground shipping for US orders over $50. Learn More
Orders Shipped in 1-2 Days
We do our best to get all orders out within one business day, Monday through Friday. Learn More
No Hassle Returns
We accept returns within 30 days of purchase. All returned items must be in new condition. Please be sure no dirt, grass or pet hair is on the item you are returning. Learn More
We Believe in What We Build
At Platypus, we take pride in engineering the highest-quality outdoor gear available, and we stand behind everything we make. Platypus gear is built to be exceptionally durable. And we back it up with the best service in the industry, all to keep your gear performing for you—and out of landfills. Visit our Platypus Warranty page for more info.