Dirty Side: The dirty side of the QuickDraw features inside/outside (I/O) threads. The outside set of threads is only compatible with QuickDraw reservoirs.™ The inside set of threads is compatible with all common 28mm-thread plastic water bottles (like smartwater®), and narrow-mouth Platy bottles including the SoftBottle™, the Platy® 2L, PlatyPreserve™ and the Platy® Water Tank.

Clean Side: The QuickDraw’s ConnectCap threads directly to all common 28mm-thread plastic water bottles (like smartwater®), and narrow-mouth Platy bottles including the SoftBottle™, the Platy® 2L, PlatyPreserve™, the Platy® Water Tank, and the Hoser™ Reservoir.

The QuickDraw 2L and 3L Gravity models have a hose with a quick connector fitted on the end that clicks into any hydration reservoir with a quick disconnect, like the Big Zip™ Evo. Hydration reservoirs without a quick disconnect pair with the ConnectCap by removing the reservoir’s bite valve and pushing its hose onto the ConnectCap’s hose attachment point.

The QuickDraw 3L Gravity’s Bottle Adapter threads directly to common wide-mouth bottles like Nalgene®, Hydro Flask® and Yeti®. It also press-fits to narrow-mouth bottles like all common 28mm-thread plastic water bottles (such as smartwater®), and narrow-mouth Platy bottles including the SoftBottle™, the Platy® 2L, PlatyPreserve™, the Platy® Water Tank, and the Hoser™ Reservoir.

While both cleaning methods clean your filter and can easily be performed in the field or at home, they are intended to complement each other and allow you to keep your QuickDraw free of debris and flowing fast.

Shake-to-Clean: Is the quicker cleaning method and can be easily done every time you filter. It works by agitating and dislodging particulates attached to the hollow fibers, particularly at the opening on the dirty side of the filter.

Backflush: Backflushing is more time consuming and the more thorough way to clean your QuickDraw. It works by passing clean water through the length of your QuickDraw—in the clean side and out the dirty side—thereby rinsing and removing particulates stuck to the hollow fibers along the length of the bundle.

That often depends on the clarity/quality of water being filtered. However proactive cleaning will keep your filter flowing faster for longer. Consider the following proactive cleaning routine:

• Quickly perform a shake-to-clean before you filter each time you fill up.
• Backflush the filter after every 10L of water you filter through it.

Use your best judgement and adjust the routine as needed depending on frequency of use and quality of water.

In the dirty your reservoir or bottle, mix 3mL (1/4 tsp) of bleach with 1L of tap water. Filter the solution through the filter (and hose if one was used). When the reservoir is empty, leave the closure cap off and allow it to dry. You can leave the clean and dirty side closures of the filter off and allow it to dry, but it is not necessary. When the reservoir is dry, store your entire QuickDraw system away from direct sunlight.

(Important: If you do store your QuickDraw wet, do not allow it to freeze.)

Diese Wasserfärbung hängt in der Regel mit einer hohen Konzentration sich zersetzender Vegetation in der Nähe von bzw. in Wasserquellen zusammen. Dabei entstehen verschiedene organische Säuren. Diese Säuren und die zugehörigen Wasserbedingungen strapazieren Wasserfilter JEDER Art stark. Verwenden Sie, sofern möglich, eine andere Wasserquelle.

Sollte es keine andere Wasserquelle geben, empfehlen wir, den Filter nach jeder Verwendung durchzuspülen oder zu reinigen. Dadurch können diese Verunreinigung bekämpft werden.

Mischen Sie nach Ihrem Outdoor-Ausflug zwei Tropfen unparfümiertes Bleichmittel für den Haushalt mit einem Liter Wasser und spülen Sie den Filter damit durch. Dies hilft, die organischen Verbindungen aufzulösen, die den Filter möglicherweise verstopfen. Das ist auch vor einer längeren Nichtverwendung wichtig.

Hinweis: Die wiederholte Verwendung von braungefärbtem Wasser kann die Leistung der Hohlfaser-Filtermedien dauerhaft beeinträchtigen.

A QuickDraw that has been recently used to filter water will have wet hollow fibers, which can freeze and break the fibers. Broken fibers no longer filter water. It is important to prevent hollow fiber filters from freezing.

If you are expecting freezing or near-freezing temperatures, we recommend carrying or stowing the filter cartridge near your body (e.g., in a chest pocket) and bringing the filter into your sleeping bag overnight.

If you think your filter may have been damaged by freezing, perform a filter integrity check before the next use to determine if it is still safely filtering water (see instructions for your filter product). Consider carrying a replacement filter as a backup in case of a failed integrity test.

Hollow fibers can break due to impact. Once broken, they will no longer safely filter water. Do your best avoid dropping or impacting your QuickDraw, particularly from heights over 5 feet (1.5 m).

If you think your filter may have been damaged from a drop, perform an integrity check before the next use to determine if it is still safely filtering water (see instructions for your filter product). Consider carrying a replacement filter as a backup in case of a failed integrity test.

Many replacement parts can be purchased directly from us online on our Accessories page or from one our retailers. If you cannot find what you’re looking for, our friendly customer service team can assist you.